SDM-9300/9350 

Integrated Access Device for the Branch Office

Analog Voice, Data and LAN Over Frame Relay

Key Features:

Key Features:

  • Frame Relay access and switching
  • Analog voice and fax support
  • SNA and legacy data support
  • SDLC and LLC2 spoofing and conversion
  • OSPF/IP/IPX routing and bridging
  • Data and voice compression
  • Voice switching and PVC bundling
  • Cell-based prioritization

Analog Voice and Fax

The SDM-9300 series offers extensive voice and fax integration and a complete set of analog telephony interfaces. It supports a number of voice compression algorithms, as well as DTMF, MF, AC-15, and pulse dial signaling. Group III FAX is supported by all voice/fax channels.

SNA & Legacy Data With Compression

The SDM-9300 series supports SNA emulation over Frame Relay for immediate savings versus costly leased lines. In addition, it handles legacy data traffic in multi-protocol environments. An integral data compression scheme optimizes network bandwidth.

Full Frame Relay Product Compatibility

The SDM-9300 series interoperates across the Frame Relay network with other Frame Relay products including our full line of ACTnet products.

OSPF/IP/IPX Routing and Bridging

The SDM-9300 series offers an Ethernet routing module to facilitate LAN connectivity using RFC-1490 over Frame Relay Networks.

Voice Switching and PVC Bundling

The SDM-9300 series concentrates Frame Relay traffic originating from multiple FRADs onto a single Frame Relay connection, reducing the total number of required Frame Relay connections and PVCs. Returning traffic may also be switched through an alternate PVC, to another NetPerformerTM FRAD further reducing the number of PVCs. The result is lower access cost for the end-user.

Specifications

System

  • Desktop or Rackmount Chassis
  • System Management: Menu Driven Command Port (VT-100)
  • Remote Telnet Access
  • FTP Upload and Download of software and configuration
  • SNMP Management via HP OpenView/ACTview 2000
  • Number of Expansion Slots: 2

Trunk

  • Number of Trunks: 1-4
  • Protocol: Frame Relay, RFC-1490
  • Local Management I/F: LMI, ANSI T1.617/Annex D, ITU-T Q.933/Annex A,
  • CLLM or disabled
  • Rates: 9.6 Kbps to 2,048 Kbps
  • Interface: RS-232C, X.21/V.11, RS-530, RS-449/RS-422, V.35 (CE mark on SDM-9350 only) software configurable
  • MD26 physical connectors

Topology: Public and Private Frame Relay, Mesh, hierarchical, star, and point-to-point

Automatic Node Discovery with automatic load balancing and dial back-up

8 classes of service, 16 Priority Weight

Data Channels

  • Number of Serial Channels: 4
  • Rate: Up to 2,048 Kbps
  • Compression: 128 Kbps trunk via software (included)
  • SNA: SDLC, LAN or Frame Relay RFC1490 (BAN, BNN)
  • Maximum of 64 PUs per unit, type 1, 2.0, 2.1 and 4/5
  • Local SDLC and LLC2 spoofing
  • SDLC to LLC2 conversion
  • Legacy Sync Protocols: SDLC, HDLC, COP, X.25, BDLC, BSC, DDCMP, VIP, ALC,
  • IBM/RJE, Uniscope, Poll/Select, Siemens Nixdorf, JCA, ZENGIN
  • Frame Relay Protocol: Frame Relay, RFC-1490; UNI-DTE, UNI-DCE
  • Async: ENQ/ACK, XON/XOFF, Transparent, Modem signals

Voice/FAX Channels:

  • Analog Voice: 2 Voice/Fax Channels on base unit. Up to 4 on SDM-9350 base e/w voice expansion card
  • Analog Interfaces: FXO, FXS, E&M 4w/2w (type I-II and V), AC-15-software configurable
  • Impedance: 600/900 ohms or complex
  • Voice Algorithms: ACELP 8K, 5.8K, 4.8K
  • Fax Support: Group III at 2.4, 4.8, 7.2, 9.6 and 14.4 Kbps
  • Modem Relay: Maximum speed of 14.4 Kbps (V.32bis)
  • Expansion Options:
  • Voice: 2 Voice/Fax Modules (for SDM-9350 only)
  • LAN: Ethernet (10Base2/10BaseT), Token Ring (4/16 Mbps)

LAN Features

  • Frame Types: Ethernet II, IEEE 802.2, 802.3, 802.5, SNAP
  • Routing: IP RIP or Static, BootP/DHCP relay, OSPF, IPX RIP and SAP
  • Source Routing, Source Routing Transparent Bridging;
  • 802.1D Spanning Tree Protocol (STP), MAC Layer, Transparent Bridging
  • Filter Criteria: Based on protocol, source/destination/ SAP address and custom filtering

Physical Dimensions:

  • 2.5" x 17" x 11.5" (6.4 cm x 48.2 cm x 29.1 cm)
  • Weight: 10.5 lbs. (4.8 kg)

Power Supply:

  • 90 to 264 VAC 50/60 Hz.
  • SDM-9300/28 watts maximum, SDM-9350/46 watts maximum

Environmental:

  • Temperature: 0 - 45° Celsius
  • Humidity:10 - 90%, non-condensing

Agency Approvals

Safety: UL 1950, (United States); CAN/CSA 22, 2; no. 950-M89 (Canada);

EN 60950 (EC), TS-001 (AUS)

EMI/EMC: FCC Part 15 Class A (United States);

EN 55022 (EC); AS-3548 (AUS)

Immunity & Susceptibility: EN 50081-2,3,4 (EC),

Telecom: FCC Part 68 (United States); CS03 (Canada), iCTR2, NET1, NET2,

CTR12 (EC), NTR8, NTR4 (UK), TS-003, TS-002 (AUS)

[SDM9300] [SDM9400] [SDM9500]