SDM-9400 

Integrated Access Device for the Regional Office

Digital & Analog Voice, Data and LAN Over Frame Relay

Save Money with Toll-Quality Voice, Fax, LAN and Multi-Protocol Communications over Cost-Effective Frame Relay Circuits.

Key Features:

  • Frame Relay access and switching
  • Digital voice, analog voice and fax support
  • SNA and legacy data support
  • SDLC and LLC2 spoofing and conversion
  • OSPF/IP/IPX routing and bridging 
  • Data and voice compression
  • Voice switching and PVC bundling
  • Cell-based prioritization 

T1/E1 Digital and Analog Voice and Fax

The SDM-9400 offers extensive voice and fax integration options, including T1 and E1 digital voice, as well as a complete set of analog telephony interfaces. It supports a number of voice compression algorithms, as well as DTMF, MF, AC-15, and pulse dial signaling. Group III FAX is supported by all voice/fax modules, providing up to 30 voice/fax channels in a single SDM-9400.

SNA & Legacy Data With Compression

The SDM-9400 supports SNA emulation over Frame Relay for immediate savings versus costly leased lines. In addition, it handles legacy data traffic in multi-protocol environments. An integral data compression scheme optimizes network bandwidth.

Full Frame Relay Product Compatibility

The SDM-9400 interoperates across the Frame Relay network with other Frame Relay products including our full line of ACTnet products.

OSPF/IP/IPX Routing and Bridging

The SDM-9400 offers an Ethernet routing module to facilitate LAN connectivity using RFC-1490 over Frame Relay Networks.

Voice Switching and PVC Bundling

The SDM-9400 concentrates Frame Relay traffic originating from multiple FRADs onto a single Frame Relay connection, reducing the total number of required Frame Relay connections and PVCs. Returning traffic may also be switched through an alternate PVC, to another NetPerformer™ FRAD further reducing the number of PVCs. The result is lower access cost for the end-user.

Specifications:

System 

  • Desktop or Rackmount Chassis
  • Processor/Memory: 25 Mhz 860 PowerQuicc, 4 MB Flash, 16 MB RAM 
  • System Management: Command Port (VT-100) 
  • SNMP Management via HP OpenView/ACTview 2000
  • Power Supply: 90 to 264 VAC 50/60 Hz or -48 VDC
  • Redundant Power: Optional
  • Number of Expansion Slots: Eight 16-Bit Slots
  • Four 32-Bit Slots (2 shared for a total of 10 simultaneous slots)

Trunk

  • Number of Trunks: 1-8
  • Protocol: Frame Relay, RFC-1490
  • Local Management I/F: LMI, ANSI T1.617/Annex D, ITU-T Q.933/Annex A, CLLM or disabled
  • Rates: 1.2 K to 2,048 Kbps
  • Interface: RS-232C, X.21/V.11, V.35/V.11, RS-530, RS-449/RS-422, software configurable 
  • DB25 physical connectors
  • Topology: Public and Private Frame Relay, Mesh, hierarchical, star, and point-to-point Automatic Node Discovery with automatic load balancing and dial back-up 
  • 8 Priority Levels, 16 Priority Weight

Data Channels

  • Number of Serial Channels: 8
  • Rate: Up to 2,048 Kbps
  • Compression: 256Kbps via software (included)
  • SNA: SDLC, LAN or Frame Relay RFC1490 (BAN, BNN)

      •  

    • Maximum of 64 PUs per unit, type 1, 2.0, 2.1 and 4/5
    • Local SDLC and LLC2 spoofing
    • SDLC to LLC2 conversion
  • Legacy Sync Protocols: SDLC, HDLC, COP, X.25, BDLC, BSC, DDCMP, VIP, ALC, IBM/RJE, Uniscope, Poll/Select, Siemens Nixdorf, JCA, ZENGIN
  • Frame Relay Protocol Frame Relay, RFC-1490; UNI-DTE, UNI-DCE
  • Async: ENQ/ACK, XON/XOFF, Transparent, CTS/DTR

Expansion Options

  • LAN: ETH-01 Ethernet (10Base2/10BaseT) 
  • Voice Modules: T1C, E1C, DVC-06, VFC-03
  • Analog Voice: Up to 8 Voice/Fax Channels (VFC-03 modules)

      •  

    • Analog Interfaces: FXO, FXS, E&M 4w/2w, AC-15 software configurable
    • Impedance: 600 ohms or complex
    • T1 Digital Voice: Up to 24 Voice / Fax Channels (T1C; DVC-06 modules)
    • Line Coding: B8ZS / B7ZS / AMI
    • Coding: ulaw
    • Framing: D4 / ESF
    • Signaling: Robbed bit
    • Impedance: 100 ohms
  • E1 Digital Voice: Up to 30 Voice / Fax Channels (E1C; DVC-06 modules)

      •  

    • Physical/Structure: G.703 / G.704
    • Line Coding: HDB3 
    • Coding: alaw
    • Framing: G.732
    • Signaling: CAS / R2
    • Impedance: 75-ohm unbalanced, 120 ohm balanced
  • Dialing: DTMF, MF, Pulse dial 
  • Voice Algorithms: ACELP 8K, 5.8K, 4.8K, ADPCM G.726, PCM G.711
  • Fax Support: Group III at 2.4, 4.8, 7.2, 9.6, 12 Kbps

LAN Features

  • LAN ports:1 Ethernet
  • Frame Types: Ethernet II, IEEE 802.2, 802.3, 802.5, SNAP 
  • Routing: IP RIP or Static, BootP, OSPF, IPX RIP and SAP;
  • 802.1D Spanning Tree Protocol (STP), MAC Layer, Transparent Bridging
  • Filter Criteria: Based on protocol, source/destination/ SAP address and custom filtering

Physical Dimensions

  • Height: 5.25" (13.34 cm)
  • Width: 17" (43.18 cm)
  • Length: 18" (45 72 cm)
  • Weight: 30 lbs. (13.61 kg)

Environmental

  • Temperature: 0 - 45° Celsius
  • Humidity: 10 - 90%, non-condensing

Agency Approvals

  • Safety: UL 1950, (United States); CAN/CSA 22, 2; no. 950-M89 (Canada); EN 6950 (EC), TS-001 (AUS)
  • EMI/EMC: FCC Part 15 Class A (United States); EN 55022 (EC); AS-3548 (AUS) 
  • Immunity & Susceptibility: EN 50082-2,3,4 (EC), Telecom: FCC Part 68 (United States); CS03 (Canada), iCTR2, NET1, NET2, CTR12 (EC), NTR8, NTR4 (UK), TS-003, TS-004 (AUS)
[SDM9300] [SDM9400] [SDM9500]